Hello Nannies and Parents! I will warn you that this post is a long one but it features 2 how to art projects, play tips, and storage tips! Also with the upcoming holiday aka CHRISTMAS this could make for a great gift for your little Lego/ block lover this year 🙂
The idea for Princess Street began one day during nap time as I was staring at the hap hazardous mess of Disney Princess Legos and Duplos strewn all across the living room floor. Ruby had fallen in love with Legos after a trip to Barnes and Noble. She got hooked on the Disney Princess sets. So she earned each one as rewards for helping around the house or doing something special. As we acquired more and more of these adorable sets I realized we had no real, good place to play with them. When we played on the carpet it was too hard to put them together. When we played on the hardwood floors they slipped all around. So I was left with a challenge to figure out the perfect place to play with these great Lego sets. I looked at Target for the green Lego squares that can hold Legos down, but those were $20 for one! So then I started thinking about how to solve this problem. Lego Friends has a play mat for the Heartlake city where all the girls are from. You can put the Juice Shop along one street and Emma’s House on the next. I then figured out something like that would solve this problem. However I searched all over the internet and nothing like this exists for Disney Princesses. There is no play mat or anything that can make a princess neighborhood. This baffled me because as Ruby always say “but Kelly I don’t want to play with just one. All my princesses are best friends and want to live by each other.” It was then I knew I needed to make my own Disney Princess neighborhood. So I took to brainstorming how this might be possible. After work that day I went to Michael’s craft store and walked around and around and finally figured out exactly what I was going to do. It took time and love but the finished product was totally worth it. Take a look inside Princess Street 🙂
As you can see Princess Street has evolved as Ruby has grown. It began with the Disney Princess Lego Duplo sets, and now holds the Disney Princess Lego sets and a house we created on our own from Target. That is the beauty of Princess Street, it can become anything you want it to. We reorganize it and design it each time we take it out. We have also come up with a neat and organized way to store it all. Below are the instructions on how to make and store your own Princess Street (or Lego City, Superhero Lane, or any other neighborhood your kiddo wants!):
What you will need:
- 2 Foam Poster Boards (found at Target, Michael’s, Walgreens, etc)
- 3D Puff Paint (various colors that pertain to your theme, found at any craft store)
- Curved Road Stencil (I made mine out of thick cardstock)
- Duct Tape (color doesn’t matter because you can’t see it)
- Stickers (pertaining to your theme, ours is princess of course!)
How to make:
- Lay the 2 boards on the floor side by side.
- Draw your stencil however you want your road to be. I wanted ours to curve so I drew it that way. Cut your stencil out of your thick paper.
- Place your stencil where you want the road to be. Hold in place and trace around. Do the same on the other board.
- Use marker or puff paint to outline the road and make marks along the lanes.
- Use puff paint to write the name of the neighborhood. We chose Princess Street.
- Let dry COMPLETELY. Usually 2 hours will do. Keep child away! As you can see on the back of mine I messed up and didn’t wait long enough 🙂
- Add details to the neighborhood, like a pond or garden with makers. We chose to have 2 ponds because in the beginning we had 2 Ariel Lego sets and of course both needed to be in the water!
- Decorate with stickers where you want.
- Once the front is done and dry, flip them over and place duct tape along the edges connecting the two boards. Put a good amount on. This will help reinforce the middle of the boards. Only put the tape on one side though, otherwise it own’t be able to fold up for easy storage.
- Set up your Lego sets how you would like and enjoy!
The Disney Princess Lego sets we have featured on our Princess Street are Sleeping Beauty’s Royal Bedroom, Jasmine’s Exotic Palace, Ariel’s Magical Kiss, Cinderella’s Romantic Castle, Cinderella’s Dream Carriage, and Rapunzel’s Creativity Tower. We also have the Lego Duplo Disney Princess Collection featuring Snow White, Cinderella, and Ariel.
All and more can be found HERE!
How to Make Your Own House:
As you can see we added a non Lego house to our street. I’m sure you all know Lego sets are expensive! Ruby loves Princess Street so much and wanted more and more to fill up the neighborhood, so instead of buying another expensive Lego set we ventured to Target to buy a make you own kit! Kid Made Modern Art-Chitecture Kit
This kit is only $25 and is very sturdy. Now this set is not too kid friendly for them to make. It’s kinda difficult even for adults. Totally worth it in the end though, but it took some time. To include Ruby in the making of this house I had her pick the paper I used on the walls and floors.
What you will need:
- Kid Made Modern Art-Chitecture Kit (from Target)
- Extra scrapbooking paper (any craft store)
- Glue Stick
How to make it:
- Follow the directions inside the kit.
- It comes with a lot of furniture pieces but those are really hard to put together. We only put together the ones we knew we would use (bed, table, chair, etc).
- Decide what papers you want to be on what walls and floors. It comes with about 10 pages that stick right on to the wood. That is not enough to cover every wall and floor. We used scrapbooking paper to finish off the other walls.
- Trace the size of the wall and cut the paper to fit. Then use a glue stick to get it on the wall and floor.
- Once you have all the walls and floors covered in your desired paper you can glue it all together!
- Let it sit and dry for a day before use, but then it is good to go.
We put ours up on TV trays that Ruby has at her house. It allows her to be able to walk around the whole street. She can play with the fronts of the sets and the backs. She loves driving her princesses from house to house in her Cinderella carriage, or has special guest (Lego Friends characters) fly in on the private jet. You could also set this up on a coffee table or even just the floor!
It’s easy to set up and easy to store. The boards fold together so it can fit in a small space along a wall. We bought storage bins from target to put Ruby’s blocks in. We have one for her Lego Duplo blocks. We have a few for her Disney Princess Lego’s so we don’t have to take apart all the Princess’s house each time we play. Then we have a small 3 storage drawer labeled with easy to read titles of things to keep in them (dolls, extra parts, sticks, etc).
Princess Street has been a HUGE hit at our house! Every kid who comes over always wants to play with it, and Ruby loves to let them. While yes it does take some time to get it all put together, like I said before totally worth it. I would make a million more of these because they provide so much fun for your kid! It allow them to be creative and inventive every time we pull it out to play. I hope you found this how to helpful and enjoy your version of Princess Street as much as we love ours 🙂
© The Nanny Guide 2015
More Pictures from Princess Street